2GIG Panic Button Remote

Description

Hit the 2GIG Panic Button Remote to immediately trigger an emergency signal from anywhere within 350 feet of your Go!Control panel (or Vario wireless receiver). Whether your system is armed or disarmed, the Panic Button will initiate an alarm. The water-resistant button can be mounted to a wall with the included bracket, worn with the included lanyard or wristband, or clipped onto a belt or car visor with the included clip.
Water-resistant button triggers emergency alarm
Works with 2GIG wireless systems (345 MHz)
Wear, clip, or mount the button
Wireless range up to 350 feet
To prevent false alarms, the 2GIG Panic Button Remote requires you to press and hold the button for 2 seconds before an alarm signal is sent. An LED indicator lights to confirm successful transmission.
Contents
Panic Button Remote
Multi-Functional Clip
Wall Mount
Wristband
Lanyard
Battery
NOTE: Requires connection to a 2GIG wireless system, such as a GoControl Panel or a Vario wireless-enabled system.
Technical Details
MPN:
2GIG-PANIC1-345
Wireless Signal Range:
350 feet, open air, with 2GIG Wireless Control Panel
Code Outputs:
Alarm; Supervisory; Low Battery
Transmitter Frequency:
345.000 MHz (crystal controlled)
Transmitter Frequency Tolerance:
±15kHz
Transmitter Bandwidth:
24kHz
Modulation Type:
Amplitude Shift Keying-On/Off Keying (ASK-OOK)
Unique ID Codes:
Over one million different code combinations
Supervisory Interval:
70 minutes
Peak Field Strength:
Typical 36,000 uV/m at 3m
Dimensions:
1.65(L) x 1.20(W) x 0.50(H) inches (4.19 x 3.05 x 1.27 cm)
Weight:
0.45 ounces (12.8 g)
Housing Material:
ABS plastic
Color:
White with gray button
Operating Temperature:
32° to 120° F (0° to 49° C)
Relative Humidity:
5 to 95 percent Non-Condensing
Battery:
One (1) Panasonic CR123A or equivalent Lithium battery (included)
Regulatory Listings:
ETL, FCC Part 15, Industry Canada
Warranty:
2 Years Limited