4 Channels 2000M Long Range 10A DC 9V 12V 24V RF Radio Transmitter & Receiver

Description

0020527
4  Channels 2000M Long Range 10A DC 9V 12V 24V RF Radio  Transmitter & Receiver
Model: 0020508
Package  Include:
1 x Receiver: S4U-DC09-ANT2 / S4U-DC12-ANT2 /  S4U-DC24-ANT2 (4 Channel / Four Control Modes)
1 x Transmitter: CB-4L
1 x User manual
Feature:
Application: It can be used in industry  automation, agriculture automation and home automation, such as factory, house,  farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call,  etc. It can remote control equipments on land, water and air, such as remote  control lights, sirens, locks, motors, fans, winches, blinds, linear actuators,  doors, windows, electric solenoid valves, security alarm, business signs and  various devices.
Wireless control, easy to install.
Relay Output: This receiver is relay output,  it can be used to operate both DC and AC equipments. The terminals are NO / NC  (normally open / normally closed), which serves as a switch. That means you  should also connect a separate power supply to equipments.
You can turn on/ off the receiver with  transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls,  floors, doors or windows.
With reverse power protection and over current  protection.
Reliable control: The receiver only works with  the transmitter which use same code.
One/several transmitters can control  one/several receivers simultaneously.
You can use two or more units in the same  place.
Receiver:
Model No.: S4U-DC6-ANT2/S4U-DC09-ANT2/S4U-DC12-ANT2/S4U-DC24-ANT2
Channel: 4 CH
Control Modes: Toggle, Momentary, Momentary + Toggle, Latched
Power Supply (Operating  Voltage): DC6V (S4U-DC6-ANT2), DC9V±1V (S4U-DC09-ANT2), DC12V±1V  (S4U-DC12-ANT2), DC24V±1V (S4U-DC24-ANT2)
Working Voltage Range of  Relay: AC110~240V or DC0~28V
Working Frequency: 315MHz  / 433MHz
PCB size: 94mm x 73mm x 21mm
Case size: 100mm x 80mm x 28mm
Static Current: ≤6mA
Maximum Power: 10A / each  channel
Work with Fixed code transmitters or Learning code transmitters.
Transmitter:
No.: 0021119 (CB-4L)
Channel/Button: 4
Button Symbol: A, B, C, D
Operating Voltage: 9V (1  x 6F22 -9V battery, can be used for 12 months)
Operating Current: 20mA
Operating Frequency:  315Mhz / 433Mhz
Encoding Chip: EV1527
Encoding Type: Learning code (up to 1 million codes, reducing  code collision and unauthorized code scanning possibilities.)
Transmitting Distance:  1000m / 3000ft (theoretically)
The distance of 1000m is a theoretical data, it shall be operated  in an open ground, no barriers, no any interference. But in the practice, it  will be hindered by trees, walls or other constructions, and will be exposed to  some interference by other signals. Therefore, the actual distance may or may  not reach 1000m.
If you stretches the telescopic antenna, it can have a further  working range, which is twice as much as it used to be.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
Weight: 95g
Matching Transmitters:
The receiver can work with different transmitters, such as model  C-4/C-4L (100M), CWB-4 (50M, waterproof), CP-4 (500M), or CB-4/CB-4L (1000M)  etc.
Working Range:
Super long range, with a transmitter (such as  CB-4) to form a complete set, the maximum working distance can reach 2000M in an  open ground.
The maximum working distance is a theoretical  data, it shall be operated in an open ground, no barriers, no any interference.  But in the practice, it will be hindered by trees, walls or other constructions,  and will be interfered by other wireless signals. Therefore, the actual distance  may not reach this maximum working distance.
Magnetic Sucker Antenna:
Frequency Range:  300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length:1.5m, we also can offer longer cable, such as  5meters, 10meters, 30meters.
Anti-interference, waterproof, shielded wire set inside.
Magnetic stand design for easy to install.
Usage (with the transmitter CB-4):
The receiver can be used to control both DC 0~28V and AC 110~240V  equipments.
Notice: The receiver is relay output, not DC/AC power output.  Initial state of relay output terminals: Terminals B and C are Normally Open;  Terminals A and B are Normally Closed.
Wiring:
If you want to control a DC 12V lamp, do as following:
1) Connect the positive pole of DC power supply to terminal “L / +” of INPUT,  and connect the negative pole of DC power supply to terminal “N / -” of INPUT.
2) Connect terminal C to the positive pole of DC power supply, connect terminal  B to the positive pole of DC lamp, and connect the negative pole of DC lamp to  the negative pole of DC power supply.
If you want to control an AC 220V lamp, do as following:
1) Connect the positive pole of DC power supply to terminal “L / +” of INPUT,  and connect the negative pole of DC power supply to terminal “N / -” of INPUT.
2) Connect terminal C to the live wire of AC power supply, connect terminal B to  one side of AC lamp, and connect another side of AC lamp to the neutral wire of  AC power supply.
Setting different control modes:
Setting different control modes: (We  have set the receiver in toggle mode before delivery, if you want to use other  modes, do as following operation.)
1) Learning Toggle control mode:
When the receiver is in the status of  LEARNING, press button A of the remote control.
Control mode Toggle (Channel 1~4): Press -> On; Press again -> Off.
Press button A: Turn on relay 1 (connect B and C, disconnect A and B), the lamp  1 is on
Press button A again: Turn off relay 1 (disconnect B and C, connect A and B),  the lamp 1 is off.
…
Press button D: Turn on relay 4 (connect B and C, disconnect A and B), the lamp  4 is on
Press button D again: Turn off relay 4 (disconnect B and C, connect A and B),  the lamp 4 is off.
2) Learning Momentary control mode:
When the receiver is in the status of  LEARNING, press button B of the remote control.
Control mode Momentary (Channel 1~4): Press and hold -> On; Release -> Off.
Press and hold button A: Turn on relay 1 (connect B and C, disconnect A and B),  the lamp 1 is on
Release button A: Turn off relay 1 (disconnect B and C, connect A and B), the  lamp 1 is off.
…
Press and hold button D: Turn on relay 4 (connect B and C, disconnect A and B),  the lamp 4 is on
Release button D: Turn off relay 4 (disconnect B and C, connect A and B), the  lamp 4 is off.
3) Learning Momentary (Channel 1~2) + Toggle (Channel 3~4) control mode:
When the receiver is in the status of LEARNING, press button C of the remote  control.
4) Learning Latched control mode:
When the receiver is in the status of  LEARNING, press button D of the remote control.
Control mode Latched (Channel 1~4): Press -> On, other relays Off; Press other  button -> Off.
Press button A: Turn on relay 1 (connect B and C, disconnect A and B), the lamp  1 is on
Turn off other relay (disconnect B and C, connect A and B), other lamps are off.
…
Press button D: Turn on relay 4 (connect B and C, disconnect A and B), the lamp  4 is on
Turn off other relay (disconnect B and C, connect A and B), other lamps are off.
How to pair the transmitter to the receiver:
1) Press the learning button of receiver for 1- 2 seconds; signal  LED on the receiver is on. The receiver enters into status of LEARNING.
2) Press any one button on transmitter. If signal LED flashes  quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the  learning button, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different  codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don’t want  the receiver to work with the remote control, you can delete all codes of remote  controls, which are stored in the receiver.
Operation: Press and hold the learning button of receiver until  signal LED flashes slowly; release the button, LED keeps slow flash. That means  all stored codes have been deleted successfully.
Shipping:
Shipping methods: Ship to Worldwide by Airmail.
Delivery time: 10~25 working days (not including week-end and holiday).
We will ship the item to your shipping address of PayPal within 1~2 working days after clearance of payment.
Please contact us immediately if you want to change your shipping address. We are not responsible for wrong address.
We will inform you via Email when shipping your items.
Guarantee:
Guaranty: One year, if the products have any quality problem, we will resend the same unit to you by free, but you need to defray the postage.