-40%

Qolsys IQ 16-F Hardwire to Wireless Converter w/ Large Enclosure

$ 78.67

Availability: 100 in stock
  • MPN: QS7134-840
  • Brand: Qolsys
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Type: Security System Controller Accessory
  • Model: QS7134-840

    Description

    Hi Qolsys IQ 16-F Hardwire to Wireless Converter w/ Large Enclosure. Condition is New. Shipped with USPS Priority Mail.
    Convert hardwired alarm sensors to wireless. Works with Qolsys IQ alarm panels.
    IQ Hardwire 16-F (Large Enclosure)
    The IQ Hardwire 16-F (Large Enclosure) offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2. It includes a large enclosure with ample wire routing room, backup battery charging, 500mA of 12volt auxiliary power, an onboard siren relay, built-in status LED’s for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.
    FEATURES
    - Large plastic enclosure with ample wiring room, backup battery holder, and an expansion slot for second module
    - Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
    - Supports up to ten two wire smoke detectors
    - LED lighted zones for ease of “learn-in” installation/troubleshooting
    - EOL supervision using 4.7K Ohm resistors (included) or 1k-10k Ohm depending on Resistor Mode
    - Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
    - Charging circuit for back-up battery, fully supervised with power outage recovery
    SPECIFICATIONS
    - Input Voltage: 16.0VDC Plug-In Transformer
    - Backup Battery: 12VDC 5AH Max (not included)
    - Dimensions: 16” X 14" X 3”
    - Operating Temperature: 32 to 122F (0 to 50C)
    - Humidity: 95% RH Max
    - EOL Supervision: 4.7k Ohm fixed or 1k-10k Ohm depending on Resistor Mode
    - Input Zones: 15 N/O or N/C
    - Smoke Zone: 1 two-wire smoke loop, 10 detectors max. Support for System Sensor® 2W-B, 2WT-B, 2WTA-B*
    - Auxiliary Voltage Output: 12VDC @ 500mA Max
    - Tamper Zone: Used for case tamper, no resistor
    - Relay Contact: 60VDC/1A Max drives siren
    *Detector models should not be mixed