-40%
Qolsys IQ Hardwire 16-F Wireless Converter (QS7133-840)

Qolsys IQ Hardwire 16-F Wireless Converter (QS7133-840)

$ 53.18

Availability: 100 in stock
  • Shipping Profile ID: 81449843020
  • MPN: QS7133-840
  • Condition: New
  • Brand: Qolsys
  • All returns accepted: Returns Accepted
  • Model: QS7133-840
  • Compatible Brand: N/A
  • Type: Security System Controller Accessory
  • Color: N/A
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Connectivity: N/A
  • Item must be returned within: 30 Days

    Description

    Add hardwired security zones to your IQ Panel 2 (or 2+) with the Qolsys IQ Hardwire 16-F Wireless Converter. This security control board increases the amount of sensors and smoke detectors that can be supported in your Qolsys system. The board also provides power sources for multiple input zones, LED status lights, backup battery charging, and a siren relay.
    Programmable security control board supports security and smoke detecting zones
    Supports up to 10 2-wire smoke detectors and powers up to 15 input zones
    Encrypted S-Line technology protects signals while supporting legacy 319.5 systems
    LED lights indicate status of each individual zone
    Up to 500 Milliamps of power for hardwired motion detectors, glass break detectors, and/or sirens
    Charging circuit for back-up battery, fully supervised with power outage recovery
    Installation Details
    The IQ Hardwire 16-F Wireless Converter comes with a small plastic enclosure for easy mounting. Vertically install the Wireless Converter in your desired location within wireless range of your IQ Panel. Wire in your desired devices and sensors and attach the included antenna to the top of the control panel. Afterwards, pair the Converter with your IQ Panel by press and holding the "EOL LEARN" button on the Converter and placing your IQ Panel into "Auto Learn" mode.
    Contents
    Wireless Converter
    Antenna
    Enclosure
    NOTE: Not for use with CO detectors.
    Technical Details
    Manufacturer Part #:
    QS7133-840
    UPC:
    857497008039
    Input Voltage:
    16.0VDC Plug-In Transformer
    Backup Battery:
    12VDC 5AH Max (optional)
    Dimensions:
    5.5 H X 3.5 W inches
    Operating Temperature:
    32 to 122 degrees F (0 to 50 degrees C)
    Humidity:
    95% RH Max
    EOL Supervision:
    4.7K Ohm fixed or 1k-10k Ohm depending on Resistor Mode
    Input Zones:
    15 N/O or N/C (Normally Open/Normally Closed)
    Smoke Zone:
    1 two-wire smoke loop, 10 detectors max. Support for System Sensor@reg; 2W-B, 2WT-B, 2WTA-B*
    Auxiliary Voltage Output:
    12VDC @ 500mA Max
    Tamper Zone:
    Used for case tamper, no resistor
    Relay Contact:
    60VDC/1A Max drives siren